World Initial Magnetic Digital Brinell
and Rockwell hardness tester, which can make accurate Brinell
hardness test with conventional indentation method of ISO 6506.2
and ASTM E 10. It can also make rapid Brinell hardness test
with depth-measuring method of ASTM E 103, and read hardness
value directly…
view
Fix Rockwell test head to the surface
of iron and steel parts to test the hardness by applying magnetic
force. Follow Rockwell hardness test method completely and the
test condition complies with standard of ISO 6508 and ASTM E
18.The magnetic Rockwell hardness tester is mainly applied in
on-site qui…
view
PHB-3000 Hardness Tester adopts hydraulic
principle and applies 3000kgf test force by hand operation.
The central part of PHB-3000 is a small hydraulic system in
which a release valve is used to control the test force. When
the test force rises 3000kgf, the release valve will open and
pressure will f…
view
TX MS-1 series Brinell Indentation Measurement
System with advanced visual technology to shoot the indentation
by CCD camera lens, recognizing and measuring the diameter of
the indentation automatically on laptop, and then show the Brinell
hardness value of the workpiece on the display directly. It
i…
view
Webster hardness testers also known as
Webster hardness pliers, they can be used to test the hardness
value of aluminum alloy quickly at the scene of the production.
They are the preferred instruments for testing the force of
aluminum alloy. W-20 Webster hardness tester can be used to
test the ha…
view
934-1 is a kind of portable hardness tester,
it is the typical model which is in widest application mainly
used for rapid hardness test for aluminum and aluminum alloy,
as well as fiberglass reinforced plastic. Barcol hardness tester
has the simple operation by just single hand and wide measuring
ran…
view
ED400 Coating Thickness Gauge is the improved
model of the ED300 Gauge. The performance is prominently improved.The
gauge is used to measure the thickness of the insulating coating
on nonmagnetic metals. It is mainly used to measure the anodic
oxide coating on aluminum alloy profiles, aluminum compos…
view
PHBR-4-3 C-clamp Brinell and Rockwell
hardness tester is designed and developed according to the basic
principle of Brinell and Rockwell hardness testing methods.
The test principle, test conditions and test accuracy are all
up to the international standard ISO6508/6506.The PHBR series
hardness teste…
view
PHR series portable Rockwell hardness
tester complies with the basic designing principles of Rockwell
hardness testing in accordance with international standard ISO6508,
American Standard ASTM E18 and ASTM E110.The hardness values
can be read directly from the Rockwell hardness testers after
rapid an…
view
The PHB-1 Pin Impact hardness tester is
designed following the Brinell hardness test method. The test
force is controlled by a shear pin. After reading the diameter
of the indention with the reading microscope, the Brinell hardness
value can be obtained from the look up table.This kind of hammer
impa…
view
PHR Chain Clamp Rockwell Hardness Tester
which can test the hardness of cylindrical workpieces such as
pipes, shafts, rollers accurately on-site. The test principle
and accuracy comply to standard ISO 6508 and ASTM E110. Tested
by National Institute of Metrology with tolorance <1.5HRC, equivalent
…
view
PHR-1S portable superficial Rockwell hardness
testers comply with the basic designing principles of Rockwell
hardness testing in accordance with international standard ISO6508,
American Standard ASTM E18 and ASTM E110. The hardness values
can be read directly from the superficial Rockwell hardness
te…
view
Daily Maintenance of Webster Hardness TesterThe testers of this series are precision
instruments, of which the service life mainly depends on
the correct method of use and timely and proper maint…
Principle of Rockwell Hardness TestAs illustrated in Fig. 1, the indenter
is pressed (diamond cone or carbide ball ) into the specimen
surface in two steps. After maintaining the pressur…